1

1. Close all of the vehicle doors.
2. Turn the ignition switch to the ON position.

The SECURITY indicator turns OFF.

SECURITY Warning Not Operating Properly

2

1. Roll down the driver's window.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Open the driver's door.

The SECURITY indicator starts flashing ON and OFF.

SECURITY Warning Not Operating Properly

3

Press the LOCK button on the remote transmitter.

The SECURITY indicator stops flashing and remains ON continuously.

SECURITY Warning Not Operating Properly

4

Close all of the doors.

The SECURITY indicator turns OFF after approximately 15 seconds. The system is now armed.

SECURITY Warning Not Operating Properly

5

Perform any of the following functions in order to activate an armed theft deterrent system and in order to simulate an illegal entry:

The CTD system activates the following actions in order to indicate a vehicle intrusion:

6

Use the key in order to unlock the driver door or the passenger door.

The alarm disarms.

7

Press the UNLOCK button on the remote transmitter.

The alarm disarms.

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.