Cause
| Correction
|
Low oil pressure
|
- Perform an oil pressure test. Refer to
Oil Pressure Diagnosis and Testing
.
- Repair or replace, as required.
|
Detonation or spark knock
| Verify the correct operation of the ignition controls. Refer to
Detonation/Spark Knock
.
|
Loose torque converter bolts or improperly installed torque converter - automatic transmission only
|
- Inspect the torque converter bolts and flywheel.
- Verify correct installation of the torque converter.
- Repair, as required.
|
Cracked flywheel - automatic transmission
|
- Inspect the flywheel bolts and flywheel.
- Repair, as required.
|
Excessive connecting rod bearing clearance
|
- Inspect the following components:
• | The connecting rod bearings |
- Repair, as required.
|
Excessive crankshaft bearing clearance
|
- Inspect the following components:
• | The crankshaft bearings |
• | The crankshaft journals |
• | The cylinder block crankshaft bearing bore |
- Repair, as required
|