Removal Procedure
- Open the hood.
- Remove the screws retaining the air inlet grille panels to the cowl vent.
- Remove the wiper arms from the vehicle. Refer to
Windshield Wiper Arm Replacement.
- Disconnect the washer hoses from the air inlet grille panel.
- Remove the air inlet grille panels from the vehicle.
Installation Procedure
- Install the air inlet grille panels to the vehicle.
- Align the retainers in the body with the tabs on the grille panel. Press the retainers into place.
- Connect the washer hoses to the air inlet grille panel.
- Install the wiper arms to the vehicle. Refer to
Windshield Wiper Arm Replacement.
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws in sequential order to retain the air inlet grille panels to the cowl vent (1-7).
Tighten
Tighten the screws to 1.7 N·m (15 lb in).
- Close the hood.