Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views | |||
1 | Did you review the Rear Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Is the rear window wiper always ON? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 |
Does the test lamp illuminate? | Go to Step 5 | Go to Step 4 |
4 | Connect a test lamp from the rear window washer switch signal circuit terminal in the rear wiper motor harness connector to ground. Does the test lamp illuminate? | Go to Step 6 | Go to Step 9 |
5 |
Did you find and correct the condition? | Go to Step 11 | Go to Step 7 |
6 |
Did you find and correct the condition? | Go to Step 11 | Go to Step 7 |
7 | Inspect for poor connections at the rear window wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 8 |
8 | Replace the rear window wiper/washer switch. Refer to Rear Window Wiper and Washer Switch Replacement . Is the repair complete? | Go to Step 11 | -- |
9 | Inspect for poor connections at the rear window wiper module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 10 |
10 | Replace the rear window wiper module. Refer to Rear Window Wiper Motor Replacement . Is the repair complete? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
