GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Steering Column Bracket Replacement

Removal Procedure
  1. Loosen and move center console rearward for access to the knee bolster bolt. Refer to Console Replacement .
  2. Remove the screws/bolts that hold the knee bolster trim panel to the instrument panel (I/P). Refer to Driver Knee Bolster Panel Replacement .

    3. Object Number: 832829 Size: SH
  3. Remove the nuts that hold the knee bolster deflector to the I/P.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 832829 Size: SH
  1. Align and fasten the nuts that hold the knee bolster deflector.

    2. Tighten
    Tighten the nuts to 2 N·m (18 lb in).

  2. Fasten the screws/bolts that hold the knee bolster trim panel to the I/P. Refer to Driver Knee Bolster Panel Replacement .
  3. Align and move forward center console in place and fasten to the center console bracket. Refer to Console Replacement .