GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Preface 🢒 Cautions and Notices 🢒 Transfer Case Shift Control Module Replacement

Removal Procedure

    Object Number: 860519 Size: SH
  1. Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement .
  2. Disconnect the shift control module electrical connectors .
  3. Reposition the harness.
  4. Remove the module from the vehicle.

Installation Procedure

    Object Number: 860519 Size: SH
  1. Install the shift control module to the vehicle.
  2. Connect the shift control module electrical connectors .
  3. Install the knee bolster. Refer to Driver Knee Bolster Panel Replacement .
  4. Start the engine and test the automatic transfer case system for proper shift operation.