Preliminary Procedure

Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement .

1

Air Inlet Assembly Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Procedure

Tighten the fasteners equally to ensure the air inlet assembly seats evenly.

2

Air Inlet Assembly (Recirculation Door)

Procedure

1. Disconnect the electrical connectors.
2. When replacing the Recirculation Door, transfer all necessary components.
3. Re-calibrate the Recirculation Actuator. Refer to Actuator Recalibration

Tip
The Recirculation Door is part of the Air Inlet Assembly.