GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H2 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Liftgate Wiring Harness Replacement

Removal Procedure
  1. Open the liftgate.
  2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  3. Disconnect the latch electrical connectors.
  4. Disconnect the lock actuator electrical connector.
  5. Disconnect the rear wiper motor electrical connector.
  6. Disconnect the rear wiper module connectors.
  7. Disconnect the rear defroster grid connectors.
  8. With a flat-bladed tool, release all the retainers attaching the wiring harness to the liftgate.

    9. Object Number: 832289 Size: SH
  9. Note routing. Remove the wiring harness from the liftgate through the passthrough holes (1).

Installation Procedure

    Object Number: 832289 Size: SH
  1. Route wiring harness through the passthrough holes (1).
  2. Noting proper routing, attach all the retainers securing the harness to the liftgate.
  3. Connect the rear defroster grid connectors.
  4. Connect the rear wiper module connectors.
  5. Connect the rear wiper motor electrical connectors.
  6. Connect the lock actuator electrical connector.
  7. Connect the latch electrical connectors.
  8. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .