GM Service Manual Online
For 1990-2009 cars only

Power Steering Pump Pulley Replacement LH8


Object Number: 1912606  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the generator bracket. Refer to Generator Bracket Replacement .

1

Power Steering Pump Pulley

Procedure

  1. Use remover J 25034-C to remove the power steering pump pulley.
  2. Use installer J 25033-C to install the power steering pump pulley.
  3. Ensure the power steering pully is 0.35 mm (0.014 in) forward on the power steering pump shaft.

Special Tools

    • J 25033-C Pulley Installer
    • J 25034-C Pulley Remover

Power Steering Pump Pulley Replacement LLR

Tools Required

    • J 25033-C Pulley Installer
    • J 25034-C Pulley Remover

Removal Procedure

  1. Remove the drive belt. Refer to Drive Belt Replacement .

  2. Object Number: 649303  Size: SH
  3. Remove the power steering pump pulley using remover J 25034-C .

  4. Object Number: 1201377  Size: SH
  5. Remove the power steering pump pulley from the power steering pump shaft.

Installation Procedure


    Object Number: 1201377  Size: SH
  1. Install the power steering pump pulley to the end of the power steering pump shaft.

  2. Object Number: 643361  Size: SH
  3. Install the power steering pump pulley to the power steering pump using installer J 25033-C .

  4. Object Number: 245012  Size: SH
  5. Install the power steering pump pulley (1) flush against the end of the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
  6. Install the drive belt. Refer to Drive Belt Replacement .