Preliminary Procedures

1. Evacuate the air conditioning (A/C) system. Refer to Refrigerant Recovery and Recharging.
2. Remove the evaporator tube from the condenser. Refer to Evaporator Tube Replacement.
3. Remove the discharge hose from the condenser. Refer to Discharge Hose Replacement.
4. Remove the fan shroud. Refer to Engine Coolant Fan Shroud Replacement.

1

Radiator Support Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Radiator Support Bracket

3

Condenser Assembly Stud

Tighten
10 N·m (89 lb in)

4

Condenser Assembly Bolt

Tip
Tilt the radiator assembly toward the rear of the vehicle to access the right condenser bolt.

Tighten
28 N·m (21 lb ft)

5

Condenser Assembly - A/C

Tip
Tilt the radiator toward the rear of the vehicle to remove the condenser.