GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 Captiva 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Knee Bolster Replacement

Removal Procedure

    Important: Left - Hand Drive Shown, Right - Hand Drive Similar.


    Object Number: 1822296 Size: SH
  1. Remove the instrument panel lower left trim. Refer to Instrument Panel Lower Trim Panel Replacement - Left Side .
  2. Remove the screws and bolts.
  3. Remove the driver knee bolster.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1822296 Size: SH
  1. Install the driver knee bolster with the screws and bolts.

    2. Tighten

        • Tighten the driver knee bolster screws to 2.5 N·m (23 lb in).
        • Tighten the driver knee bolster bolts to 20 N·m (15 lb ft).
  2. Install the instrument panel lower left trim. Refer to Instrument Panel Lower Trim Panel Replacement - Left Side .