Warning: Refer to Battery Disconnect Warning in the Preface section.
Note: Do not tighten the accessory drive belt idler pulley-to-generator through bolt at this stage.
Caution: Refer to Fastener Caution in the Preface section.
• | The generator-to-battery lead wire retaining nut to 58 N·m (43 lb ft). |
• | The accessory drive belt idler pulley-to-generator through bolt to 50 N·m (37 lb ft). |
Warning: Refer to Battery Disconnect Warning in the Preface section.
Caution: Refer to Fastener Caution in the Preface section.
• | The generator bolt to 30 N·m (22.1 lb ft). |
• | The generator B+ wiring harness retaining nut to 25 N·m (18.4 lb ft). |
Warning: Refer to Battery Disconnect Warning in the Preface section.
Note: Do not remove the generator through bolt, nut and washers at this stage.
Note: Do not tighten the generator through bolt at this stage.
Caution: Refer to Fastener Caution in the Preface section.
• | The generator upper bracket retaining bolts (1) to 25 N·m (18 lb ft) and the bolt (2) to 35 N·m (26 lb ft). |
• | The generator-to-intake manifold strap bracket retaining bolt (3) to 35 N·m (26 lb ft) and the bolt (4) to 25 N·m (18 lb ft). |