DEFINITION: This diagnostic table is designed to diagnose ONLY the components of the PARK brake system in order to determine if the PARK brake system is operating properly. You will be directed by the appropriate Symptom table to go to other brake system diagnostic tables as appropriate.

Were you sent here from a Hydraulic Brake Symptom table?

Go to Step 4

Go to Step 2

Were you sent here from a Park Brake Symptom table?

Go to Step 4

Go to Step 3

Is the symptom related to the ability of the park brake system to hold and/or release?

Go to Diagnostic Starting Point - Park Brake

Go to Diagnostic Starting Point - Hydraulic Brakes

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Release the park brake.
3. Shift the transmission into NEUTRAL.
4. Support the rear suspension with jacks in order to maintain the correct angle of the rear lower control arms.
5. Attempt to rotate the rear wheels in order to inspect the rear brakes for a significant amount of drag.

Do the rear brakes have a significant amount of drag?

Go to Step 11

Go to Step 5

1. With the transmission in NEUTRAL, apply the park brake.
2. Attempt to rotate the rear wheels in order to inspect the rear brakes for a significant amount of drag.

Do the rear brakes have a significant amount of drag?

Go to Step 6

Go to Step 7

1. Release the park brake.
2. Rotate the rear wheels in order to inspect the rear brakes for a significant reduction in the amount of drag.

Did the rear brakes exhibit a significant reduction in the amount of drag?

Go to Step 21

Go to Step 11

Visually inspect the park brake cable connections and the cables that are accessible on the UNDERSIDE of the vehicle for disconnections or damage.

Were any of the park brake cables disconnected or damaged?

Go to Step 8

Go to Step 9

Reconnect or replace the park brake cables as necessary. Refer to Park Brake Cable Replacement.

Did you complete the repair and/or replacement?

Go to Step 9

--

Inspect the adjustment of the park brake. Refer to Park Brake Adjustment.

Is the park brake adjustment correct?

Go to Step 11

Go to Step 10

Adjust the park brake. Refer to Park Brake Adjustment.

Were you able to adjust the park brake?

Go to Step 16

Go to Step 11

Caution: Do not depress the brake pedal with the brake rotors and/or the brake drums removed, or with the brake calipers repositioned away from the brake rotors, or damage to the brake system may result.

1. Remove the rear brake rotors. Refer to Rear Brake Rotor Replacement.
2. Inspect the park brake hardware for loose, damaged, broken or missing components. Refer to Park Brake Hardware Inspection.
3. Inspect the adjusters for a seized condition.

Does the park brake hardware and/or the park brake adjuster require replacement?

Go to Step 12

Go to Step 13

Replace the park brake components as necessary.

Refer to Parking Brake Shoe Replacement.

Did you complete the replacement?

Go to Step 13

--

Have an assistant apply and release the park brake, while you observe the park brake cables for free movement.

Did the park brake cables move freely?

Go to Step 14

Go to Step 17

Inspect the adjustment of the park brake. Refer to Park Brake Adjustment.

Is the park brake adjustment correct?

Go to Step 16

Go to Step 15

Adjust the park brake. Refer to Park Brake Adjustment.

Were you able to adjust the park brake?

Go to Step 16

Go to Step 26

1. With the transmission still in NEUTRAL, apply the park brake.
2. Attempt to rotate the rear wheels in order to inspect the rear brakes for a significant amount of drag.
3. Release the park brake.
4. Rotate the rear wheels in order to inspect the rear brakes for a significant reduction of drag.

Did the park brake apply and release properly?

Go to Step 28

Return to Symptom Table

Disconnect the park brake cable connections that are accessible on the UNDERSIDE of the vehicle, one at a time, and inspect each cable for free movement.

Do any of the park brake cables accessible on the underside of the vehicle require replacement?

Go to Step 18

Go to Step 19

Replace any of the park brake cables that do not have free movement or are not releasing properly. Refer to Park Brake Cable Replacement.

Did you complete the replacement?

Go to Step 19

--

1. Disconnect the front park brake cable connection accessible INSIDE the vehicle at the park brake lever assembly and inspect for free movement.
2. Replace the front park brake cable if the cable does not have free movement. Refer to Park Brake Cable Replacement.

Did you find and correct a condition?

Go to Step 24

Go to Step 20

Replace the park brake lever assembly. Refer to Parking Brake Lever Replacement.

Did you complete the replacement?

Go to Step 25

--

Inspect the adjustment of the park brake. Refer to Park Brake Adjustment.

Is the park brake adjustment correct?

Go to Step 28

Go to Step 22

Adjust the park brake. Refer to Park Brake Adjustment.

Were you able to adjust the park brake?

Go to Step 27

Go to Step 23

1. Remove the rear brake rotors if they have not yet been removed. Refer to Rear Brake Rotor Replacement.
2. Inspect the park brake adjusters for a seized condition and replace components as necessary. Refer to Park Brake Hardware Inspection.

Did you find and correct a condition?

Go to Step 24

Go to Step 26

Adjust the park brake. Refer to Park Brake Adjustment.

Were you able to adjust the park brake?

Go to Step 27

Go to Step 26

Adjust the park brake. Refer to Park Brake Adjustment.

Were you able to adjust the park brake?

Go to Step 27

Return to Symptom Table

1. Replace the component that is used to adjust the park brake system. Refer to Park Brake Cable Replacement.
2. Adjust the park brake. Refer to Park Brake Adjustment.

Did you complete the replacement and adjustment?

Go to Step 27

Return to Symptom Table

1. With the transmission in NEUTRAL, apply the park brake.
2. Attempt to rotate the rear wheels in order to inspect the rear brakes for a significant amount of drag.
3. Release the park brake.
4. Rotate the rear wheels in order to inspect the rear brakes for a significant reduction of drag.

Did the park brake apply and release properly?

Go to Step 28

Return to Symptom Table

Instal or connect any components that you removed or disconnected during diagnosis.

Did you complete the operation?

Park Brake System OK

Return to Symptom Table

--