GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Camshaft Position Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1760930 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the camshaft position (CMP) sensor connector.

    4. Object Number: 1758671 Size: SH
  4. Remove the timing belt front cover. Refer to Timing Belt Rear Cover Replacement.
  5. Remove the CMP sensor bolts.
  6. Remove the CMP sensor from the top.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1758671 Size: SH
  1. Install the CMP sensor with the bolts.

    2. Tighten
    Tighten the camshaft position sensor bolts to 8 N·m (71 lb in).


    Object Number: 1760930 Size: SH
  2. Install the timing belt front cover. Refer to Timing Belt Rear Cover Replacement.
  3. Connect the CMP sensor connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.