GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Epica 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Primary Latch Release Cable Replacement

Removal Procedure

    Object Number: 1256881 Size: SH
  1. Remove the hood release handle screw.
  2. Remove the knee bolster and the hood release handle.
  3. Remove the cable from the hood release handle.
  4. Remove the hood secondary latch. Refer to Hood Primary and Secondary Latch Replacement.
  5. Remove the cable from the engine compartment.

Installation Procedure

    Object Number: 1256881 Size: SH
  1. Install the cable through the engine compartment.
  2. Install the hood secondary latch. Refer to Hood Primary and Secondary Latch Replacement.
  3. Install the cable to the hood release handle.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the hood release handle and the knee bolster with the screw and tighten to 2.5 N·m (22 lb in).