Removal Procedure
- Lower the headliner to access the sunroof actuator. Refer to
Headlining Trim Panel ReplacementHeadliner Replacement in Interior Trim.
Important: If the sunroof window is partially closed,
remove the actuator first, before moving the sunroof window forward.
- Remove the sunroof actuator to sunroof module retaining bolts (1).
- Disconnect the sunroof actuator wiring connector.
- Remove the sunroof actuator from the sunroof module.
Installation Procedure
- Manually move the sunroof window to the fully closed position.
- Install the sunroof actuator to the sunroof module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunroof actuator to sunroof module retaining screws (1).
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Connect the sunroof actuator wiring connector to the sunroof actuator.
- Initilization /Teach the sunroof motor. Refer to
Sunroof Motor/Actuator Synchronization.
- Verify the sunroof operation.
- Install the headliner. Refer to
Headlining Trim Panel ReplacementHeadliner
Replacement in Interior Trim.