Remove the following components from the springs:

1. Remove stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .
2. Remove the front stabilizer shaft to front axle U-bolts and nuts.
3. Remove stabilizer shaft from the axle.

1. Install the stabilizer shaft.
2. Install the shaft mounting U-bolts and nuts.

Notice: Refer to Fastener Notice in the Preface section.

3. Tighten the stabilizer nuts alternately and evenly until the shaft mounting brackets reach torque.

Tighten

•	Tighten the M-14 stabilizer nuts to 65 N·m (48 lb ft).

•	Tighten the M-10 stabilizer nuts to 25 N·m (18 lb ft).

4. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .