Instrument Cluster Replacement Instrument Cluster

1. Remove the cluster trim. Refer to Instrument Panel Carrier Replacement .



2. Remove the cluster screws.
3. Disconnect the electrical connector.

1. Connect the electrical connector.



2. Install the cluster screws.



3. Install the cluster trim. Refer to Instrument Panel Carrier Replacement .

Instrument Cluster Replacement Speedometer

1. Remove the cluster trim. Refer to Instrument Panel Carrier Replacement .
2. Remove the cluster.



3. Remove the speedometer screws.
4. Disconnect the electrical connector.

1. Connect the electrical connector.



2. Install the speedometer screws.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Tighten
Tighten the screw to 2 N·m (17.35 lb in).

3. Install the cluster.
4. Install the cluster trim. Refer to Instrument Panel Carrier Replacement .