GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2001 🢒 Isuzu T-Series (Truck Line C) 🢒 Engine 🢒 Engine Electrical 🢒 Speedometer Replacement

Removal Procedure
  1. Remove the cluster trim. Refer to Instrument Panel Carrier Replacement .
  2. Remove the cluster.

    3. Object Number: 215557 Size: SH
  3. Remove the speedometer screws.
  4. Disconnect the electrical connector.

Installation Procedure
  1. Connect the electrical connector.

    2. Object Number: 215557 Size: SH
  2. Install the speedometer screws.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Tighten
    Tighten the screw to 2 N·m (17 lb in).

  3. Install the cluster.
  4. Install the cluster trim. Refer to Instrument Panel Carrier Replacement .