GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Body and Accessories 🢒 Doors 🢒 Window Regulator Replacement - Right Side

Removal Procedure
  1. Remove the lower inner window. Refer to Front Side Door Window Replacement - Inner Lower .
  2. Remove the trim panel. Refer to Door Trim Panel Replacement .
  3. Remove the water deflector.
  4. Remove the door window. Refer to Door Window Replacement .

    5. Object Number: 214706 Size: SH
  5. Remove the bolts from the window regulator assembly.
  6. Remove the window regulator assembly.

Installation Procedure

    Object Number: 214706 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the window regulator assembly with the bolts.

    2. Tighten
    Tighten the bolts to 9 N·m (79 lb in).

  2. Install the door window. Refer to Door Window Replacement .
  3. Install the water deflector.
  4. Install the trim panel. Refer to Door Trim Panel Replacement .
  5. Install the lower inner window. Refer to Front Side Door Window Replacement - Inner Lower .