Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Hydraulic Brake Diagnostic System Check? | -- | Go to Step 2 | |||||||||
2 | Inspect the brake pedal assembly for the following:
Are the components misaligned or binding? | -- | Go to Step 3 | Go to Step 4 | ||||||||
3 | Repair or replace the cause of the misalignment, interference or binding. Did you complete the repair? | -- | -- | |||||||||
4 | Inspect the brake linings for the following conditions:
Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes. Did you find a condition? | -- | Go to Step 5 | Go to Step 6 | ||||||||
5 | Replace the brake linings. Refer to the following procedures:
Did you complete the repair? | -- | -- | |||||||||
6 | Inspect the brake assembly for missing or loose attachments. Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes. Are there any loose or missing attachments? | -- | Go to Step 7 | Go to Step 8 | ||||||||
7 | Tighten or replace loose or missing components as necessary. Did you complete the repair? | -- | -- | |||||||||
8 | Check for an improperly adjusted park brake. Is the park brake improperly adjusted? | -- | Go to Step 9 | Go to Step 10 | ||||||||
9 | Adjust the park brake. Did you complete the repair? | -- | -- | |||||||||
10 | Inspect the front suspension for loose or missing attachments. Refer to Fastener Tightening Specifications in Front Suspension. Are there any loose or missing components? | -- | Go to Step 11 | Go to Step 12 | ||||||||
11 | Tighten or replace the loose or missing attachments. Refer to Fastener Tightening Specifications in Front Suspension. Did you complete the repair? | -- | -- | |||||||||
12 | Inspect the disc brake caliper for the following conditions:
Did you find a condition? | -- | Go to Step 13 | Go to Step 14 | ||||||||
13 | Replace the components. Refer to Front Brake Caliper Replacement or Rear Brake Caliper Replacement in Disc Brakes. Did you complete the repair? | -- | -- | |||||||||
14 | Inspect the brake fluid for contamination. Is the brake fluid contaminated? | -- | Go to Step 15 | Go to Step 16 | ||||||||
15 |
Did you complete the repair? | -- | -- | |||||||||
16 | Inspect the brake pipes and brake hoses for the following conditions:
Refer to Hydraulic Brake System Flushing . Did you find a condition? | -- | Go to Step 17 | Go to Step 18 | ||||||||
17 |
Did you complete the repair? | -- | -- | |||||||||
18 | Verify the brake system operation. Does the original condition still exist? | -- | Go to Step 1 | System OK |
