Brake System Noise Brakes Applied
Step | Action | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnostic System Check performed? | Go to Step 2 | |||||||||||||
2 | Inspect the brake linings for the following: Refer to Brake Pad Inspection in Disc Brakes:
Do any of the above conditions exist? | Go to Step 3 | Go to Step 4 | ||||||||||||
3 | Replace the brake linings as necessary. Refer to the appropriate procedure in Disc Brakes. Did you complete the repair? | Go to Step 8 | -- | ||||||||||||
4 | Inspect the brake rotors for the following:
Refer to Brake Rotor Wear Tolerance Test . Do any of the above conditions exist? | Go to Step 5 | Go to Step 6 | ||||||||||||
5 | Resurface or replace the brake rotor as necessary. Refer to the appropriate procedure in Disc Brakes. Did you complete the repair? | Go to Step 8 | -- | ||||||||||||
6 | Inspect brake assembly for loose, broken or missing attachments. Refer to Brake Pad Inspection in Disc Brakes. Are there any loose, broken or missing attachments? | Go to Step 7 | |||||||||||||
7 | Repair or replace the components as necessary. Did you complete the repair? | Go to Step 8 | -- | ||||||||||||
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
Brake System Noise Brakes not Applied
Step | Action | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnostic System Check performed? | Go to Step 2 | |||||||||||||
2 | Inspect the brake linings for the following: Refer to Brake Pad Inspection in Disc Brakes.
Do any of the above conditions exist? | Go to Step 3 | Go to Step 4 | ||||||||||||
3 | Replace the brake linings as necessary. Refer to the appropriate procedure in Disc Brakes. Did you complete the repair? | Go to Step 8 | -- | ||||||||||||
4 | Inspect the brake rotors for the following:
Refer to Brake Rotor Wear Tolerance Test . Do any of the above conditions exist? | Go to Step 5 | Go to Step 6 | ||||||||||||
5 | Resurface or replace the brake rotor as necessary. Refer to the appropriate procedure in Disc Brakes. Did you complete the repair? | Go to Step 8 | -- | ||||||||||||
6 | Inspect brake assembly for loose, broken or missing attachments. Refer to Brake Pad Inspection in Disc Brakes. Are there any loose, broken or missing attachments? | Go to Step 7 | |||||||||||||
7 | Repair or replace the components as necessary. Did you complete the repair? | Go to Step 8 | -- | ||||||||||||
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
