GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Aurora 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Weatherstrip Replacement

Removal Procedure
  1. Lower the window all the way down.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the door module. Refer to Door Control Module Replacement .
  4. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  5. Remove the window inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  6. Remove the window outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  7. Remove the window. Refer to Rear Side Door Window Replacement .

    8. Object Number: 441805 Size: SH
  8. Remove the rear door window weatherstrip fasteners.
  9. Grasp the lower front edge of the window weatherstrip.
  10. Pull the weatherstrip out of the door frame.
  11. Remove the fastener from the run channel.
  12. Slide the window weatherstrip forward until it clears the door frame.
  13. Remove the weatherstrip.

Installation Procedure

    Object Number: 441805 Size: SH
  1. Position the rear door stationary window and the weatherstrip into the door frame.
  2. Install and fully seat the upper rear corner of the weatherstrip into the upper auxiliary molding and over the pinch-weld flange.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the window weatherstrip fastener.

    4. Tighten
    Tighten the fastener to 6 N·m (53 lb in).

  4. Position the remainder of the window weatherstrip into the door frame.
  5. Install the window. Refer to Rear Side Door Window Replacement .
  6. Install the window outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  7. Install the window inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  8. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  9. Install the door module. Refer to Door Control Module Replacement .
  10. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .