Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:
• | Unnecessary SIR system repairs |
In order to avoid the above conditions, observe the following guidelines:
• | Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring. |
• | If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System. |
- Disable the inflatable restraint steering
wheel module. Refer to
Disabling the SIR System
in SIR.
Important: Place the steering column in the center position.
- Remove the tilt lever from the upper trim cover. Refer to
Tilt Lever Replacement - On Vehicle
.
- Remove the steering wheel from the steering column. Refer to
Steering Wheel Replacement
.
- Remove the steering column from the vehicle. Refer to
Steering Column Replacement
.
- Remove the 2 pan head tapping screws (1) from the
lower trim cover (2).
- Remove the lower trim cover (2).
- Remove the lower trim
cover.
- Remove the 2 TORX®
head screws (1) from the upper trim cover (2).
- Remove the upper trim cover (2).