Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the map lamp assembly. Refer to
Reading Lamp Replacement
.
- Disconnect the electrical connector from the intrusion sensor.
- Remove the screws and the intrusion sensor bracket.
- Remove the intrusion sensor.
Installation Procedure
- Install the intrusion sensor.
- Install the intrusion sensor bracket and screws.
- Connect the electrical connector to the intrusion sensor.
- Install the map lamp assembly. Refer to
Reading Lamp Replacement
.
- Connect the negative battery cable.