Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 | Do the wipers operate at all with the wiper switch in HI? | -- | Go to Step 4 | Go to Step 3 |
3 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the replacement complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 8 | Go to Step 5 |
5 | Check for a poor connection at connector C201, or for an open in the pigtail to the wiper/washer switch. Is a poor connection or open circuit present? | -- | Go to Step 7 | Go to Step 6 |
6 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the replacement complete? | -- | -- | |
7 | Repair the poor connection or the open in the pigtail wires to the wiper/washer switch. Is the repair complete? | -- | -- | |
8 |
Is the test light on? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 92. Is the repair complete? | -- | -- | |
10 | Check for a poor connection to the wiper motor. Is a poor connection condition present? | -- | Go to Step 11 | Go to Step 12 |
11 | Repair the poor connection to the wiper motor. Is the repair complete? | -- | -- | |
12 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the repair complete? | -- | -- |
