Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
SCHEMATIC REFERENCE: Exterior Lights Schematics | ||||
1 | Did you perform the Lighting System Diagnostic System Check? | -- | ||
2 | Do the hazard lamps work properly? | -- | Go to Hazard Lamps Inoperative | |
3 |
Does the test lamp illuminate? | -- | ||
4 |
Does the test lamp illuminate? | -- | ||
5 | Inspect for poor connections at the hazard flasher switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
6 | Replace the turn signal/hazard flasher module. Refer to Hazard Lamp Flasher Replacement . Did you complete the replacement? | -- | -- | |
7 | Repair the open in turn signal switch power circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
8 | Inspect for poor connections at the turn signal switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
9 | Replace the turn signal switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | -- | |
10 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | |
