GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Bonneville 🢒 General Information 🢒 General Information 🢒 Front Bumper Fascia Energy Absorber Replacement

Removal Procedure

    Object Number: 477320 Size: SH
  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Remove the license plate or the license pocket cover, if applicable. Refer to Front License Plate Mount Trim Cover Replacement .

    3. Important: There is a third fastener on "SE" models located on the underside of the fascia, aft of the license plate cover lower flange.

  3. Using a square drive bit, remove the fasteners (2).
  4. Remove the energy absorber from the fascia.

Installation Procedure

    Object Number: 477320 Size: SH
  1. Align the energy absorber to front bumper fascia.
  2. Install the fasteners (2).
  3. Install the license plate or the license pocket cover. Refer to Front License Plate Mount Trim Cover Replacement .
  4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .