Removal Procedure
- Remove front side door trim. Refer to
Door Trim Panel Replacement
.
- Remove water deflector. Refer to
Door Water Deflector Replacement
.
- Remove electrical connectors
from all
components in door.
- Remove wiring harness grommet (3) from door (1).
- Remove crosscar and front side door wiring harness from door.
- Remove door spring.
- Support door in preparation for door removal.
- Remove upper (2) and lower hinge nuts (4).
- Remove door from vehicle.
Installation Procedure
- Install door to upper
and lower hinges.
- Install upper (2) and lower hinge nuts (4).
Tighten
Tighten the nuts to 50 N·m (37 lb ft).
- Install door spring.
- Install crosscar and front side door wiring harness from door.
- Install wiring harness grommet (3) from door (1).
- Install electrical connectors from all components in door.
- Install water deflector. Refer to
Door Water Deflector Replacement
.
- Install front side door trim. Refer to
Door Trim Panel Replacement
.