Caution: Disconnect the power window switch when working inside the driver door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury.

The clip retaining the outside door handle opening rod to the door lock is not to be reused. The clip must be replaced after being opened to release the rod.

1. Raise window.
2. Remove front side door trim panel. Refer to Door Trim Panel Replacement .
3. Remove water deflector. Refer to Door Water Deflector Replacement .
4. Remove outside handle rod (3) from the clip on the outside handle (4).
5. Remove outside handle nuts (6).
6. Remove outside handle (4) from door outer panel.
7. Remove outside door filler (5) from outside handle (4).

Caution: Disconnect the power window switch when working inside the driver door. When operated, the Express Up/Down Feature allows the door window to move very quickly, without stopping, which could cause personal injury.

1. Install outside door filler (5) from outside handle (4).
2. Install outside handle (4) from door outer panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install outside handle nuts (6).

Tighten
Outside handle nuts to 9 N·m (80 lb. in.).

4. Install outside handle rod (3) from the clip on the outside handle (4).
5. Install water deflector. Refer to Door Water Deflector Replacement .
6. Install front side door trim panel. Refer to Door Trim Panel Replacement .