GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

  1. Remove the ignition key from the ignition key lock cylinder.
  2. Disconnect the body control module (BCM) connector C3.
  3. Connect a test lamp from B+ to BCM connector  C3 terminal C14.

Does the test lamp light?

--

Go to Step 3

Go to Step 2

2

Replace the body control module (BCM). Refer to Body Control Module Replacement .

Is the repair complete?

--

System OK

--

3

  1. Test for a short to ground in circuit 80.
  2. If circuit 80 is OK, replace the ignition key warning switch. Refer to Ignition Lock Cylinder Replacement - On Vehicle .

Is the repair complete?

--

System OK

--