Lift-Out Panel Mounting Hardware Replacement Longitudinal Bow Finish Molding

1. Remove roof lift window panels. Refer to Roof Lift Off Panel Adjustment .



2. Remove roof panel longitudinal bow finish molding bolts/screws (1) from molding (2).
3. Remove longitudinal bow finish molding (2) from vehicle roof (3).

1. Install longitudinal bow finish molding (2) to vehicle roof (3).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install roof panel longitudinal bow finish molding bolts/screws (1) to molding (2).

Tighten
Tighten the bolts/screws as they are installed in positions 5, 3, and 4 to 1.7 N·m (15  lb in).

3. Install roof lift window panels. Refer to Roof Lift Off Panel Adjustment .

Lift-Out Panel Mounting Hardware Replacement Lock Cylinder Replacement

1. Remove roof lift-off window. Refer to Roof Lift Off Panel Adjustment .



2. Remove roof lift-off handle spring (11).
3. Remove handle (1).
4. Remove trim cover bolts/screws (3).
5. Remove trim cover (10).



6. Remove lock cylinder retainer (2) from lock cylinder (3).
7. Remove lock cylinder (3) from lift-off window frame (1).

1. Install lock cylinder (3) into lift-off window frame (1).

Important: Align tabs of lock cylinder (3) with notches in latch support.

2. Install lock cylinder retainer (2) to lock cylinder (3).



3. Install trim cover (10).
4. Install trim cover bolts/screws (3).
5. Install handle (1).
6. Install roof lift-off handle spring (11).
7. Install roof lift-off window. Refer to Roof Lift Off Panel Adjustment .