Removal Procedure
- Remove roof lift-off window. Refer to Roof Lift Off Panel Adjustment .
- Move window to bench for disassembly.
- Remove handle (1) by removing handle spring (11) with small flat-blade screwdriver.
- Remove trim cover bolts/screws (3).
- Remove trim cover (10).
- Remove weatherstrip bolts/screws (6, 9).
- Remove weatherstrip (8) by pulling from weatherstrip retainer (5).
- Remove weatherstrip retainer bolts/screws (7).
- Remove weatherstrip retainer (5).
Important: Ensure that glass is not scratched by placing window on a clean cloth.
Installation Procedure
- Install weatherstrip retainer (5).
- Install weatherstrip retainer bolts/screws (7).
- Install weatherstrip (8) by pulling from weatherstrip retainer (5).
- Install weatherstrip bolts/screws (6, 9).
- Install trim cover (10).
- Install trim cover bolts/screws (3).
- Install handle (1) on shaft (in the open position) and secure with handle spring (11).
- Install roof lift-off window. Refer to Roof Lift Off Panel Adjustment .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts/screws to 1.7 N·m (15 lb in).
Tighten
Tighten the bolts/screws to 1.3 N·m (12 lb in).
Tighten
Tighten the bolts/screws to 1.7 N·m (15 lb in).
