Removal Procedure
- Remove the rear seat cushion. Refer to
Rear Seat Cushion Replacement.
- Remove the rear seat back. Refer to
Rear Seat Back Replacement.
- Remove the upper rear quarter trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Remove the rear seat belt lower anchor to body retaining
bolt (1).
- Remove the rear seat belt guide assembly to body retaining
bolt (1).
Important: Lift and tilt the seat belt retractor (3)
approximately 30 degrees to detach the seat belt retractor from the body slot (4).
- Remove the rear seat belt retractor to body retaining bolt (2).
- Remove the rear seat belt assembly (1) from the vehicle.
Installation Procedure
Important: Lower the seat belt retractor (3)
at an angle of approximately 30 degrees to attach the seat belt retractor onto the
body slot (4).
- Install the rear seat belt assembly (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear seat belt retractor to body retaining bolt (2).
Tighten
Tighten the rear seat belt retractor to body retaining
bolt (2) to 43 N·m (31 lb ft).
- Install the rear seat belt guide assembly (2).
- Install the seat belt guide assembly to body retaining bolt (1).
Tighten
Tighten the seat belt guide assembly to body retaining
bolt (1) to 43 N·m (32 lb ft).
- Install the rear seat belt lower anchor (2).
- Install the rear seat belt lower anchor to body retaining bolt (1).
Tighten
Tighten the rear seat belt lower anchor to body
retaining bolt (1) to 43 N·m (31 lb ft).
- Install the upper rear quarter trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Install the rear seat back. Refer to
Rear Seat Back Replacement.
- Install the rear seat cushion. Refer to
Rear Seat Cushion Replacement.