Removal Procedure
Warning: Refer to Safety Glasses Warning in the Preface section.
Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the
opposite end from which the components are being removed and strap the vehicle to the hoist.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the front wheelhouse liners. Refer to
Front Wheelhouse Liner Replacement.
- Remove the front air deflector to front bumper fascia retaining screws (2).
- Remove the front bumper fascia. Refer to
Front Bumper Fascia Replacement.
- Remove the front air deflector to front frame push-in retainers (3).
- Remove the front air deflector (1).
Installation Procedure
- Position the front air deflector (1) to the vehicle.
- Install the front air deflector to front frame push-in retainers (3).
- Install the front bumper fascia. Refer to
Front Bumper Fascia Replacement.
Caution: Refer to Fastener Caution in the Preface section.
- Install the front air deflector to front bumper fascia retaining screws (2) and tighten to
3 N·m (27 lb in)
- Install the front wheelhouse liners. Refer to
Front Wheelhouse Liner Replacement.
- Lower the vehicle.