Power Steering Pump Bracket Replacement for Pontiac GTO 2006

1. Remove the power steering pump (1) from the mounting bracket (2). Refer to Power Steering Pump Replacement .
2. Remove the 2 bolts (3,4) from the bracket.
3. Remove the bracket from the cylinder head.

1. Install the mounting bracket (2) to the cylinder head.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the 2 bolts (3,4) to the bracket.

Tighten
Tighten the 2 bolts to 28 N·m (21 lb ft).

3. Install the power steering pump to the bracket. Refer to Power Steering Pump Replacement .