GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Vehicle Control Systems 🢒 Computer/Integrating Systems 🢒 Instrument Cluster Replacement

Removal Procedure

    Object Number: 1360391 Size: SH
  1. Remove the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement.
  2. Remove the 4 screws (1) attaching the instrument cluster (2) to the instrument panel.
  3. Pull the top of the cluster from its cavity.
  4. Using a flat-bladed tool, open the wiring connector locking tab (3) on the back of the cluster (2).
  5. Remove the instrument cluster (2) from the vehicle.

Installation Procedure

    Object Number: 1360391 Size: SH
  1. Connect the wiring connector and locking tab (3) to the back of the cluster (2).
  2. Install the cluster (2) to the instrument panel.

    3. Important: When a new instrument panel cluster is being replaced, it will need to be setup using a Scan Tool. Go to the Programming Selection under Instrument Panel Cluster. Special Functions and follow steps displayed.

    Notice: Refer to Fastener Notice in the Preface section.

  3. Install the 4 screws (1) attaching the instrument cluster (2) to the instrument panel.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement.