GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Transmission/Transaxle 🢒 Manual Transmission - Tremec 6-Speed 🢒 Vehicle Speed Sensor Replacement

Removal Procedure

    Object Number: 477355 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the vehicle speed sensor electrical connector (3).

    3. Object Number: 349950 Size: SH
  3. Remove the attaching bolt and the vehicle speed sensor.
  4. Remove the vehicle speed sensor.

Installation Procedure

    Object Number: 349950 Size: SH
  1. Install the vehicle speed sensor.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the vehicle speed sensor bolt.

    3. Tighten
    Tighten the vehicle speed sensor bolt to 10 N·m (89 lb in).


    Object Number: 477355 Size: SH
  3. Connect the vehicle speed sensor electrical connector (3).
  4. Lower the vehicle.