Tools Required

J 23907 Slide Hammer with Bearing Adapter

1. Remove the manual transmission from the vehicle. Refer to Transmission Replacement in Manual Transmission - Tremec 6-Speed.



2. Remove the clutch. Refer to Clutch Assembly Replacement .

Notice: DO NOT use grease under pressure to force the pilot bearing from the crankshaft or engine damage may result.

3. Using the J 23907 , remove the clutch pilot bearing.

1. Check the crankshaft rear oil gallery plug is not loose, damaged or leaking.
2. If necessary, coat the new oil gallery plug (1) with Loctite™ 242 or equivalent.



3. Install the new oil gallery plug to a depth of 31.2-31.6 mm (1.22-1.24 in).



4. Install the new pilot bearing, until flush with the crankshaft counterbore.
5. Install the clutch. Refer to Clutch Assembly Replacement .
6. Install the manual transmission in the vehicle. Refer to Transmission Replacement in Manual Transmission - Tremec 6-Speed.