Did you perform the Headlamps Diagnostic System Check?

--

Go to Step 2

Go to Headlight System Check

1. Disconnect the turn/hazard headlamp switch connector C1.
2. Connect a 20-amp fused jumper between connector C1 terminal D and terminal C (if the fuse blows, test CKT 11 for a short to ground).

Did the high beam headlamps light?

--

Go to Step 3

Go to Step 4

Replace the turn/hazard headlamp switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Standard.

Is the repair complete?

--

Go to Headlight System Check

--

Test CKT 11 for an open. Repair if necessary. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Headlight System Check

--