Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Radio/Audio System Check?
| --
| Go to
Step 2
| Go to
Radio/Audio System Check
|
2
|
- Turn the ignition switch to the LOCK position.
- Disconnect the radio connector.
- Connect J 39200
from
the radio connector cavity 10 (Pontiac) or cavity F1 (Buick/Oldsmobile)
to ground.
- Measure the voltage.
Does the multimeter read the approximate battery voltage?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Connect J 39200
from
the radio connector cavity 10 to cavity 5 (Pontiac) or from
cavity F1 to cavity E16 (Buick/Oldsmobile).
- Measure the voltage.
Does the multimeter read the approximate battery voltage?
| --
| Go to
Step 5
| Go to
Step 6
|
4
|
- Inspect for an open or poor connection in CKT 1733 wire
between the junction block and the radio.
- If the wire is OK, replace the junction block.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
5
|
- Connect J 39200
from the radio connector cavity 9 to cavity 5 (Pontiac) or from
cavity F5 to cavity E16 (Buick/Oldsmobile).
- Measure the voltage.
Does the multimeter read the approximate battery voltage?
| --
| Go to
Step 7
| Go to
Step 8
|
6
|
- Inspect for a poor connection or an open in CKT 350.
- If the wire is OK, remove the radio for repair.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
7
|
- Inspect the radio connector for terminals shorted together.
- If the terminals are OK, remove the radio for repair.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
8
|
- Inspect for a poor connection or an open in CKT 43.
- If the wire is OK, remove the radio for repair.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
