Door Window Regulator Replacement Front

1. Remove the door trim panel. Refer to Door Trim Panel Replacement .



2. Remove enough of the door water deflector to access the window regulator. Refer to Door Water Deflector Replacement .
3. Remove the door window assembly. Refer to Door Window Replacement .
4. Remove the window regulator bolts (3).
5. Remove the regulator rivets (2).
6. Remove the window regulator (1).

1. Install the window regulator (1).
2. Install the window regulator rivets (2).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the window regulator bolts (3).

Tighten
Tighten the bolt to 10.5 N·m (93 lb in).

4. Install the door window assembly. Refer to Door Window Replacement .
5. Install the door water reflector. Refer to Door Water Deflector Replacement .
6. Install the door trim panel. Refer to Door Trim Panel Replacement .

Door Window Regulator Replacement Rear

1. Remove the door trim panel. Refer to Door Trim Panel Replacement .



2. Remove enough of the door water deflector to access the window regulator. Refer to Door Water Deflector Replacement .
3. Remove the door window assembly. Refer to Door Window Replacement .
4. Remove the window regulator bolts.
5. Remove the regulator rivets (2,4).
6. Remove the window regulator (1).

1. Install the window regulator (1).
2. Install the window regulator rivets (2,4).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the window regulator bolts.

Tighten
Tighten the bolt to 10.5 N·m (93 lb in).

4. Install the door window assembly. Refer to Door Window Replacement .
5. Install the door water reflector. Refer to Door Water Deflector Replacement .
6. Install the door trim panel. Refer to Door Trim Panel Replacement .