1. Set the gear selector to the PARK position.
2. Turn the ignition switch to the START position and hold.
3. Use a DMM in order to measure the voltage from the battery positive terminal to the starter solenoid terminal B.

Is the voltage less than the specified value?

0.5 V

Go to Step 2

Go to Step 5

1. Turn the ignition switch to START and hold.
2. Use a DMM in order to measure the voltage from the battery negative terminal to G113.

Is the voltage less than the specified value?

0.5 V

Go to Step 3

Go to Step 6

Connect a remote starter switch between the starter solenoid terminal S and the battery positive terminal.

Does the starter crank?

--

Go to Step 4

Go to Step 7

Repair high resistance or poor connection in the starter circuit.

Is the repair complete?

--

System OK

--

Replace the battery positive cable. Refer to Battery Cable .

Is the repair complete?

--

System OK

--

Replace the battery negative cable. Refer to Battery Cable .

Is the repair complete?

--

System OK

--

Replace the starter. Refer to Starter Motor Replacement .

Is the repair complete?

--

System OK

--