Removal Procedure
- Remove the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement .
- Remove the steering column opening filler. Refer to Steering Column Opening Filler Replacement .
- Remove the alarm shock sensor connection, if equipped. Refer to Shock Sensor Replacement in Theft Deterrent.
- Remove the bolts/ screws from the knee bolster bracket at the instrument panel.
- Remove the bolts/ screws from the knee bolster bracket at the steering column support.
- Remove the knee bolster bracket from the instrument panel.
Installation Procedure
- Install the knee bolster bracket to the instrument panel.
- Install the bolts/ screws to the knee bolster bracket at the steering column support.
- Install the bolts/ screws to the knee bolster bracket at the instrument panel.
- Install the alarm shock sensor connection, if equipped. Refer to Shock Sensor Replacement in Theft Deterrent.
- Install the steering column opening filler. Refer to Steering Column Opening Filler Replacement .
- Install the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the knee bolster bracket bolts/ screws to 10 N·m
(89 lb in).
Tighten
Tighten the knee bolster bracket bolts/ screws to 2 N·m
(18 lb in).
