Radio Antenna Cable Extension Cable Replacement US6

1. Loosen the rear of the headliner in order to gain access. Refer to Headlining Trim Panel Replacement in Interior Trim.
2. Remove the antenna extension cable from the amplifier.
3. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.



4. Remove the right carpet retainer. Refer to Carpet Retainer Replacement in Interior Trim.



5. Remove the right center pillar lower trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
6. Pull back the right side of the carpet in order to gain access to the wiring harness.
7. Remove the right instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
8. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
9. Remove the radio. Refer to Radio Replacement



10. Disconnect the antenna extension cable from the amplifier.



11. Cut off the visible ends of the antenna extension cables from the wiring harness in the instrument panel compartment area.



12. Cut off the visible ends of the antenna extension cables from the wiring harness in the rear shelf area.
13. Remove the antenna extension cables cut ends from the vehicle.

1. Install the antenna extension cables to the vehicle.




Important: Use electrical tape in order to secure the antenna extension cable to the top of the wiring harness.

Ensure that the cable is secured to the harness at least every 150 mm (6 in), in order to avoid any possible damage to the cable.
2. Route and secure the antenna extension cable(s) to the vehicle.



3. Route and secure the antenna extension cable(s) to the vehicle.
4. Install the radio. Refer to Radio Replacement



5. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
6. Install the right side instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
7. Install the right side carpet.



8. Install the right side center pillar lower trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
9. Install the right side carpet retainer. Refer to Carpet Retainer Replacement in Interior Trim.



10. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
11. Install the rear seat back cushion. Refer to Rear Seat Back Replacement in Seats.



12. Install the antenna extension cable to the amplifier.

Radio Antenna Cable Extension Cable Replacement U77

1. Loosen the rear of the headliner in order to gain access. Refer to Headlining Trim Panel Replacement in Interior Trim.
2. Remove the antenna extension cable from the amplifier.
3. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.



4. Remove the right carpet retainer. Refer to Carpet Retainer Replacement in Interior Trim.



5. Remove the right center pillar lower trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
6. Pull back the right side of the carpet in order to gain access to the wiring harness.
7. Remove the right instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
8. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
9. Remove the radio. Refer to Radio Replacement .



10. Disconnect the antenna extension cable from the amplifier.



11. Cut off the visible ends of the antenna extension cables from the wiring harness in the instrument panel compartment area.



12. Cut off the visible ends of the antenna extension cables from the wiring harness in the rear shelf area.
13. Remove the antenna extension cables cut ends from the vehicle.

1. Install the antenna extension cables to the vehicle.




Important: Use electrical tape in order to secure the antenna extension cable to the top of the wiring harness.

Ensure that the cable is secured to the harness at least every 150 mm (6 in), in order to avoid any possible damage to the cable.
2. Route and secure the antenna extension cable(s) to the vehicle.



3. Route and secure the antenna extension cable(s) to the vehicle.
4. Install the radio. Refer to Radio Replacement .



5. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
6. Install the right side instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
7. Install the right side carpet.



8. Install the right side center pillar lower trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
9. Install the right side carpet retainer. Refer to Carpet Retainer Replacement in Interior Trim.



10. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
11. Install the rear seat back cushion. Refer to Rear Seat Back Replacement in Seats.



12. Install the antenna extension cable to the amplifier.