Removal Procedure
- Remove the instrument panel (IP) cluster
trim plate from the IP. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument Panel, Gauges and
Console.
- Disconnect the electrical connector from the fog lamp switch.
- Using a small flat-bladed tool, carefully release the retaining
tabs on the IP cluster trim plate.
- Remove the fog lamp switch from the IP cluster trim plate.
Installation Procedure
- Align the fog lamp switch to the IP cluster
trim plate, then press into place to secure.
- Connect the electrical connector to the fog lamp switch.
- Install the IP cluster trim plate to the IP. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument
Panel, Gauges and Console.