1. Turn the headlamp switch to the HEAD position.
2. Turn the headlamp dimmer switch to the HIGH position.

Is the high beam indicator in the instrument cluster ON?

--

Go to Step 3

Go to Step 2

1. Check circuit 11 for a poor connection or an open.
2. Check circuit 11 for a short to ground.
3. If OK, replace the headlamp dimmer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in steering wheel and column

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--

1. Disconnect the underhood accessory wiring junction block connector C2.
2. Using a test light, probe the underhood accessory wiring junction block connector C2 terminal F4 to ground.

Does the test light illuminate?

--

Go to Step 4

Go to Step 5

Replace the underhood accessory wiring junction block. Refer to Accessory Wiring Junction Block Replacement in body front end.

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--

Repair the poor connection or open in circuit 11 between S219 and the underhood accessory wiring junction block harness connector C2 terminal F4.

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--