GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the rear compartment lid.

  2. Object Number: 330424  Size: MH
  3. Remove the latch. Refer to Rear Compartment Lid Latch Replacement .
  4. Remove the screw (5) for the rear compartment lid ajar/lid lamp switch.
  5. Remove the lid ajar/lid lamp switch.

Installation Procedure


    Object Number: 330424  Size: MH
  1. Position the rear compartment lid ajar switch to the lid latch.

  2. Install the screw (5) to the lid ajar/lid lamp switch.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Tighten
    Tighten the rear compartment lid ajar switch screw to 5 N·m (44 lb in).

  4. Install the latch. Refer to Rear Compartment Lid Latch Replacement .
  5. Close the rear compartment lid.