GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

Schematic Reference: Audible Warnings Schematics

1

Did you review the operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Instrument Panel, Gages and Console

2

Open the driver door.

Does the door ajar indicator illuminate in the DIC when the driver door is opened?

Go to Step 3

Go to Door Ajar Indicator Malfunction in Doors

3

  1. Disconnect the BCM connector C2.
  2. Connect a test lamp between the left turn signal circuit and ground. Refer to Circuit Testing in Wiring Systems.
  3. Turn on the left turn signal.
  4. Connect a test lamp between the right turn signal circuit and ground. Refer to Circuit Testing in Wiring Systems.
  5. Turn on the right turn signal.

Does the test lamp illuminate in both cases?

Go to Step 4

Go to Step 18

4

  1. Connect a test lamp between the park lamp switch signal circuit and a good ground. Refer to Circuit Testing in Wiring Systems.
  2. Turn the headlamps ON.

Does the test lamp illuminate?

Go to Step 5

Go to Step 6

5

  1. Connect a test lamp between the key in ignition signal circuit and battery voltage. Refer to Circuit Testing in Wiring Systems.
  2. Put the key in the ignition switch.

Does the test lamp illuminate?

Go to Step 7

Go to Step 8

6

Test the park lamp switch signal circuit for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 15

7

  1. Connect a test lamp between the seat belt switch signal circuit and battery voltage. Refer to Circuit Testing in Wiring Systems.
  2. Leave the driver seat belt unbuckled.

Does the test lamp illuminate?

Go to Step 23

Go to Fasten Safety Belt Indicator/Chime Inoperative in Seat Belts

8

Test the key in ignition ground circuit for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 10

9

  1. Connect a test lamp between the DIC signal circuit and ground. Refer to Circuit Testing in Wiring Systems.
  2. Open the drivers door.

Does the test lamp illuminate?

Go to Step 12

Go to Step 11

10

Test the key in ignition signal circuit for an open, for a short to battery voltage, or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 13

11

Test the DIC signal circuit for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 14

12

Test the vehicle speed signal circuit for an open. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 16

13

Inspect for poor connections at the harness connector of the ignition and key alarm switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 21

14

Inspect for poor connections at the harness connector of the DIC. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 22

15

Inspect for poor connections at the harness connector of the headlamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 19

16

Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 23

Go to Step 20

17

Repair the open in the seat belt switch signal circuit. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

Go to Step 23

--

18

Repair the open in the suspected turn signal circuit. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

Go to Step 23

--

19

Replace the headlamp switch. Refer to Headlamp Switch Replacement in Lighting Systems.

Did you complete the replacement?

Go to Step 23

--

20

Replace the BCM. Refer to Body Control Module Replacement in Body Control Systems.

Did you complete the replacement?

Go to Step 23

--

21

Replace the ignition key alarm switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column-Tilt.

Did you complete the replacement?

Go to Step 23

--

22

Replace the DIC. Refer to Driver Information Center Module Replacement .

Did you complete the replacement?

Go to Step 23

--

23

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2