Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Head Up Display Schematics | |||
1 | Did you review the operation and perform the necessary inspections? | Go to Step 2 | |
2 | Do the IPC turn signals operate normally? | Go to Step 3 | Go to Turn Signal Lamps and/or Indicators Inoperative in Lighting Systems |
3 | Test the suspected turn signal indicator signal circuit of the HUD for an open, for a high resistance, or for a short to ground. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 6 | Go to Step 4 |
4 | Inspect for poor connections at the harness connector of the HUD. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 6 | Go to Step 5 |
5 | Replace the HUD. Refer to Head Up Display Module Replacement . Did you complete the replacement? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
